Rubber Mount
Vigo Rubber Mount are uniquely designed to isolate the transmission of vibration and noise produced by high frequency mechanical equipment.
APPLICATION
VIGO Rubber Mounts are used to isolate equipment which operate in relatively high frequency to avoid noise.
Vent Set
Low Pressure Packaged Air Handling Units
Small Pumps
VIGO RUBBER MOUNTS SELECTION TABLE
| Vigo Part No. | Colour | Hardness (Shore A) | Rated Load (Kg) | Rated Deflection (mm) | Dimensions in MM |
|||||||
| L | W | A | B | C | D | E | H | |||||
| VRM50AYL | Yellow | 50 | 80 | 10 | 80 | 45 | 35 | 8 | 60 | 9 | 6 | 40 |
| VRM60ABL | Blue | 60 | 100 | |||||||||
| VRM50BOR | Orange | 50 | 160 | |||||||||
| VRM60BGR | Green | 60 | 190 | 15 | 98 | 60 | 44 | 10 | 76 | 9 | 7 | 44 |
| VRM70BBL | Blue | 70 | 210 | |||||||||
| VRM50CYL | Yellow | 50 | 250 | |||||||||
| VRM60CBL | Blue | 60 | 350 | 15 | 140 | 85 | 65 | 13 | 105 | 15 | 7 | 67 |
| VRM70CWH | White | 70 | 650 | |||||||||
CONSTRUCTION
It is a molded elastomeric mount reinforced with top and bottom steel load plate. This incorporates two bolt-down holes on the bottom load surface which has non skid lug and a tapped steel load top plate for attachment to the supported equipment.
SPECIFICATIONS
- Elastomeric mount has been designed to resist weather and oil with excellent mechanical property.
- Vast range of load capacities is available.
- Colour coded to identify capacity.
- Encapsulated tapped steel load plate.
- Encapsulated drilled steel base plate arc.
PRODUCT GALLERY
